Yamaha EMX7 Powered Mixer

Yamaha EMX7 Powered Mixer

SKU: ZQ54580

$1,049.99

The EMX7 and EMX5 models feature a built-in high-efficiency power amplifier of 2 x 710W, 2 x 630W of output power respectively. Despite their low power consumption, these amps are capable of very high volume output, yet still manage to remain surprisingly lightweight. Both models also come equipped with an onboard overload protection function to improve reliability and prolong component life and performance quality.

The EMX7 and EMX5 benefit from a robust and portable design with a rugged, impact-resistant, powder-coated metal chassis geared towards extended operation and road usage. Large handles on the front and back of the enclosure make it extremely portable, and also help to protect knobs and terminals on the surface of the chassis from impact or pressure during transport.

With their intuitive, user-friendly architecture, the EMX7 and EMX5 can be setup and operated quickly and easily by users with a fundamental understanding of sound reinforcement. Their versatile enclosure design allows users to choose from a variety of vertical or horizontal placements depending on the type of application. From a tabletop, floor, or installation environment no matter used on a tabletop or from a seated position with the mixer placed on the floor.

Complete Range of Input & Output Channels

Both the EMX7 and EMX5 are equipped with four mono input channels and four mono/stereo input channels, allowing up to 8 microphones, and line-level devices such as keyboards and portable playback device to be connected to each channel. In addition, channel 4 can be used with Hi-Z inputs to connect instruments such as guitars or basses directly. Each model is also equipped with 2 AUX SEND connections for a monitoring system or external effect devices, REC OUT unbalanced RCA pin output jacks to connect an external recorder, and STEREO OUT TRS phone jacks to output the mixed stereo signal.

The speaker processor function allows you to select an appropriate setting to match the particular speakers you’re using. It features presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including CBR, Club, A and R series. This allows users to optimize speaker performance and save even more time during system setup. It also includes a bass boost function that can be enabled to significantly bring out the lower frequencies.

Few things make a live performance or speaking engagement take a negative turn like the sudden, uncomfortable, and often embarrassing howling of unwanted feedback. EMX7/5 come equipped with a Feedback Suppressor that utilizes a unique Yamaha digital technology to instantly eliminate annoying feedback with the single switch of a button, which utilizes a seven-band notch filter.

With individual knobs you can adjust the [HIGH], [MID], and [LOW] audio frequencies. You can operate instantly turning the control to amplify (boost) and attenuate (cut) the corresponding frequency band.

EMX7 is equipped with Flex-type graphic equalizer (Flex9GEQ) that allows you to select up to nine bands out of a total of 31 for fine tuning ±15 dB.

EMX5’s 1-Knob Master EQ™ lets you apply optimized EQ settings with the simple turn of a knob. The SPEECH setting is geared towards meetings, seminars, or conferences with a limited lower end for clear, defined speech; MUSIC offers a more balanced sound tailored to acoustic or band performances; and BASS BOOST is ideal for DJ performances or audio playback that puts a priority on emphasizing the base sound.

EMX7/5 is equipped with the popular 1-knob COMP function used in MGP and MG series models. By simply operating a single control, it is possible to get optimal compression for vocals and instruments. As the [COMP] control is turned to the right, the threshold, ratio, and output gain are adjusted simultaneously.

EMX7/5 can be mounted onto a 19-inch rack by using the RK-EMX7 (rack-mount kit) sold separately.

EMX7/5 are equipped with a powerful, comprehensive DSP section that provides a total of 24 different effects that are in the same league as our famed SPX effect processor series used by professionals. It is possible to add reverb and delay effects that simulate the sound of different performance environments, such as concert halls and small clubs.

EMX7/5 are equipped with speaker jacks which can be used with both TS phone and speakON plugs.

EMX7/5 have a highly-efficient internal universal power supply, then offer worry-free operation in any region around the globe - even in environments prone to potentially damaging power fluctuations. An internal power supply also simplifies rack mounting of the console for installed applications, eliminating the need for a bulky adapter or additional connections.

Specs
I/O Inputs TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
Phantom power +48 V
Outputs SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
Control and others FOOT SWITCH : Effect Mute on/off
Bus Stereo: 1, AUX: 2 (Including FX)
Input Channel Function PAD 30 dB (CH1-4)
Hi-Z Supported (CH4)
HPF 80 Hz, -12 dB/oct. (CH1–3)
COMP 1-knob COMP (CH1–4)
EQ HIGH 10 kHz +15 dB / -15 dB (Shelving)
EQ MID 2.5 kHz +15 dB / -15 dB (Peaking)
EQ LOW 100 Hz +15 dB / -15 dB (Shelving)
On-board processors DSP SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
On-board amplifiers Maximum output power @4ohms 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
Maximum output power @8ohms 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
Level Meter 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)
General specifications
Frequency response Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
Total harmonic distortion Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
Hum & noise level Equivalent input noise -117 dBu (Noise is measured with A-weighting filter)
Residual output noise Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit Load protection DC-fault
Amplifier protection Over heat protection, Over current protection, Integral power protection
Power supply protection Over heat protection, Over current protection
Power requirements AC 100-240V, 50Hz/60Hz
Power consumption 45 W (Idle) / 250 W (1/8 Power)
Dimensions W 465 mm (18 5/16")
H 308 mm (12 1/8")
D 325 mm (12 13/16")
Net weight 9.5 kg (20.9 lbs)
Accessories Owner’s Manual, Technical Specifications, AC power cord (2.5 m)
Options Foot switch: FC5, Rack-mount brackets: RK-EMX7
Others Operating Temperature : 0 to +40℃

Shipping Rates are calculated in the shopping cart.

Within Canada we may use Canada Post, Canpar or UPS for shipping. 

Note: Certain large/heavy products and some remote, "beyond point" or rural locations may be subject to additional shipping charges. (ie. PO Box deliveries). In these instances, we will contact you before shipping your order to discuss options.

Join our email list for new releases, special deals and details on free shipping codes and promos 😎👍

 

Return Policy Online (faders.ca)

7 Days Refund

  • Email info@faders.ca to request a Return Authorization Number. RA must be requested within 7 days of original delivery date. Returns will not be accepted without an RA.
  • Product must be in new condition with all packaging/contents intact and undamaged. 
  • 3.5% Online Purchase Processing Fee* will be withheld from all refunds for purchases made on faders.ca
  • 5% Online Purchase Processing Fee* will be withheld from all refunds for Affirm or PayPal purchases made on faders.ca
  • Restocking Fee** may apply
  • Shipping Charges are non-refundable***

 

60 Days Refund - ToneWoodAmp

  • All original packaging must be intact (non-damaged) & all parts must be enclosed
  • Product will be tested to ensure functionality
  • Faulty units will be repaired or replaced under warranty 
  • 3.5% Credit Card Processing Fee/5% Affirm Financing or PayPal Fee* will be deducted from refunds
  • Returns may be subject to a Restocking Fee**
  • Return shipping charges are the responsibility of the customer. Shipping charges are non-refundable***
  • Initial shipping costs (on free shipping orders) will be deducted from the refund

Other

We are an actual, physical,  brick and mortar music store. We do have a warehouse that we ship from but generally speaking, when you buy from us online is just like coming into our store and selecting your instrument off the rack. Before we ship any instrument we thoroughly inspect, setup, photograph and pack the item (sometimes in its original box - sometimes not as per our environmental policy). If your product shows any signs of having been used, we will contact you before shipping. Occasionally if we notice a scuff or scratch on an instrument, the price will be marked down as a result. Descriptions of the flaws aren't always in the product descriptions so if you have any questions feel free to ask us via chat on our website, email or phone.

Special orders, Used/Clearance/B-Stock/Sale items, opened/unsealed new vinyl records, books, instrument strings, microphones, headphones, USB Audio Interfaces, drumsticks, instrument polishes, reeds, brass and woodwind instruments & other similar products are non-returnable. (If a return of one of these items is approved by management, a restocking fee will apply)

* Credit Card Payment Processing Companies/Banks charge a variety of network & processing fees on every credit card purchase. They no longer refund these fees when a refund is processed so we have to pay it even if we refund an order. We are no longer able to absorb these charges and have had to pass this fee to customers when an order is refunded on purchases made in-store or online with a credit card. These Credit Card Processing Fees do not apply for refunds on purchases made with cash or debit. 

PayPal and Affirm financing refunds are subject to a 5% Online Purchase Processing Fee. Processing Fees are waived when a refund is loaded onto a Faders eGift Card. 

This policy applies to accidental & cancelled online orders as well. 

** Restocking Fee of up to 15% may apply if the product or packaging has any damage or is missing items. 

When we receive a return, we inspect and test the item out to make sure it is able to be resold. As long as the item itself is still in new condition and all the original packaging is intact and in new condition there will be no restocking fee.

*** Non-refundable shipping charges - the total cost of shipping (both ways) is non-refundable. The total actual shipping charges to & from your location will be withheld from any refunds. 

If you have any questions please call us at (204) 571-0428, email us at info@faders.ca or message us directly here on our website. Details for in-store returns available here.

 

You may also like

Recently viewed