sE Electronics sE7 Small Diaphragm Condenser Microphone by Yorkville

sE Electronics sE7 Small Diaphragm Condenser Microphone

$175.99
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon
  • Canada-Wide Shipping 🇨🇦
  • Authorized dealer · Genuine products
  • Local support · Easy returns

Shipping Rates are calculated in the shopping cart.

Within Canada we may use Canada Post, Canpar or UPS for shipping. 

Note: Certain large/heavy products and some remote, "beyond point" or rural locations may be subject to additional shipping charges. (ie. PO Box deliveries). In these instances, we will contact you before shipping your order to discuss options.

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond. With an optimized acoustic design, discrete class-A circuitry and a transformerless output, it delivers clear, natural sound quality at all frequencies, without suffering from fizzy highs or a lack of low-frequency punch.

The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What's in the Box
• sE7 microphone
• Mic clip (with thread adapter)
• Wind screen

Specs
  • Capsule: 1/2" back-electret condenser capsule
  • Polar patterns: Cardioid
  • Frequency Range: 20 20,000 Hz
  • Sensitivity: 19 mV/Pa (-34.5 dBV)
  • Max. SPL (0.5% THD): 136 / 156 dBSPL(0/20 dB Attenuation pad)
  • Equivalent Noise Level: 16 dB(A)
  • Dynamic Range: 120 / 140 dB (0/20 dB Attenuation pad)
  • Signal-to-Noise Ratio: 78 dB
  • Low Cut Filter: 80 Hz, 6 dB/Oct, switchable
  • Attenuation Pad: 20 dB, switchable
  • Powering: 48 Volts according to IEC 61938
  • Electrical Impedance: 1k Ohms
  • Current Consumption: 3.0 mA
  • Connectivity: 3-pin male XLR connector
  • Dimensions: Diameter - 23 mm (0.91 in.) Length: 120 mm (4.72 in.)
  • Weight: 128 g (4.52 oz.)

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like